Build a High-End Custom Home in Greenwood Village
Greenwood Village pairs large lots with an affluent, established character near the Denver Tech Center. PrimeStone Construction Group is a structural engineer–owned custom home builder creating high-end homes throughout Greenwood Village — with structural and foundation plans engineered and stamped in-house.
What does it take to build a custom home in Greenwood Village? Greenwood Village custom homes require Colorado PE-stamped structural and foundation plans, design for a 30 psf snow load and 120 mph wind, and fire sprinklers for homes 7,700 sq ft or larger. Construction runs $300–$450+ per sq ft for construction (excluding land), and projects take 12 to 24 months including design and permitting.
Get a Free Consultation → 720-468-0686
Why Greenwood Village Homeowners Choose PrimeStone for Custom Home Construction
- Structural engineer–owned: Greenwood Village requires PE-stamped structural and foundation plans — we engineer and stamp them in-house.
- High-end craftsmanship: The affluent market expects premium design and finish; we deliver it.
- Sprinkler & design-load fluent: We design to the Village’s 30 psf snow load, 120 mph wind, and 7,700 sq ft sprinkler threshold.
- Full digital permit management: We handle Greenwood Village’s Online Access Portal submittal and plan review.
Building a Custom Home in Greenwood Village
Greenwood Village applies rigorous review reflecting its high-value housing. Structural and foundation plans must be stamped by a Colorado-licensed engineer, plans must reflect a 30 psf snow load and 120 mph ultimate design wind speed, and new homes of 7,700 square feet or greater require residential fire sprinkler systems. Site plans must show lot-coverage, impervious-coverage, setback, and height calculations. Front Range expansive soils make an engineered foundation standard. As a structural engineer–owned firm, this is exactly our wheelhouse.
Custom Home Cost in Greenwood Village
Custom homes in Greenwood Village run $300–$450+ per sq ft for construction (excluding land), and typically higher given the market and larger home sizes. Larger homes (7,700+ sq ft) also require fire sprinkler systems, adding cost. Soft costs add roughly 15–20%. We provide a transparent hard/soft cost budget.
Permits for Custom Home Construction in Greenwood Village
Custom home construction in Greenwood Village is reviewed by the Greenwood Village Community Development Department (303-486-5783), with all residential plans submitted digitally through the Online Access Portal. Structural and foundation plans must be Colorado PE-stamped, and homes 7,700 sq ft or larger require fire sprinklers. A licensed contractor is required. We manage the full process.
Greenwood Village design-load, sprinkler, and submittal requirements change. PrimeStone confirms current requirements with the Greenwood Village Community Development Department for every custom home.
Full Custom Home Construction Details
This page focuses on custom home construction specifically in Greenwood Village. For our complete breakdown of process, costs, timelines, materials, and code requirements, see our main Custom Home Construction page (linked here).
Frequently Asked Questions
How much does it cost to build a custom home in Greenwood Village?
Custom homes in Greenwood Village run $300–$450+ per sq ft for construction (excluding land), and typically higher given the market and larger home sizes. Homes 7,700+ sq ft also require fire sprinklers. Soft costs add ~15–20%.
Do I need fire sprinklers in my Greenwood Village home?
New homes with a total floor area of 7,700 square feet or greater require residential fire sprinkler systems in Greenwood Village. We design and coordinate these where required.
What design loads apply in Greenwood Village?
Plans must reflect a 30 psf snow load and a 120 mph ultimate design wind speed, with structural and foundation plans stamped by a Colorado-licensed engineer. As a structural engineer–owned firm, we handle this in-house.
How long does it take to build a custom home in Greenwood Village?
A Greenwood Village custom home typically takes 12 to 24 months including design and permitting. Larger homes and full plan review can extend the timeline.
Ready to Start Your Greenwood Village Custom Home Construction Project?
Ready to build a high-end custom home in Greenwood Village? PrimeStone’s structural engineer–owned team handles PE-stamped plans, sprinkler design, and the full build.
Get a Free Consultation → 720-468-0686 · info@primestonecg.com